Seal / protector series 538

Seal / protector outside-diameter series used by ESP clearance calculations.

Outside diameter5.4213 in137.7 mm

Clearance envelope5.382 in136.7 mm

About this model

Seal / protector series 538 is a seal / protector supplied by ESP equipment reference. The data below comes from the published catalogue and is kept in the same units the manufacturer uses.

Key published parameters: object type Seal / protector, series 538, series group Block 1, outside diameter 137.7 mm. Use them to check whether the model fits the well geometry and the target rate before running a full design.

Compare this model with alternatives from other brands, or size it against real well conditions in the nv.design simulator.

Seal / protector

Outside diameter: 5.4213 in137.7 mm
Clearance envelope: 5.382 in136.7 mm

Seal / protector

Series: 538
Series group: Block 1

Compatible esp pump for this model

Borets Pump 538-1900 ESP pumpView

Borets Pump 538-2600 ESP pumpView

Borets Pump 538-4700 ESP pumpView

Borets Pump 538-5000 ESP pumpView

Borets Pump ESP B 538-3600 ESP pumpView

Borets Pump ESP B 538-1500 ESP pumpView

Compatible pump for this model

ESP equipment reference Pump series 538View

Compatible motor for this model

ESP equipment reference Motor series 540View

Similar seal / protector by outside diameter

ESP equipment reference Seal / protector series 130131 mmView

Comparisons with this model

series 338 vs series 400 vs series 538View

Size this model for your wellRun Seal / protector series 538 against real well conditions in the nv.design simulator.

Check clearance for Seal / protector series 538 Open in simulator